Go max 19 PU hollow bricks

Go max 19 PU hollow brick was developed in line with new knowledge and construction requirements. The hollow brick has a modern design and a length of 50cm, which enables a quicker construction and a lower consumption of mortar. Go max GM 19 PU hollow brick complements the programme of load-bearing brick elements with a tongue and groove joint.
The labeling of PU means a tongue and groove joint, which is formed in the assembly of two hollow bricks due to the particular design of vertical sides. A pocket opening is created in the middle of the joint, which is filled with mortar. Go max 19 PU hollow brick is used for the construction of load-bearing walls with a thickness of 19cm.


Advantages:

• Lesser consumption of mortar (less thermal bridges). Consumption of mortar (theoretical):  28l/m², 142l/m³ or Hollow brick Go max 19 PU V:  24l/m², 119l/m³
• Element length of 50cm (consumption only 10 pieces/m²)
• Tongue and groove joint (reinforced wall at the vertical joint, prevented thermal bridge)
• Elegant for the assembly of water plumbing and electrical installations
• Suitable for the installation of console loads
• Excellent compressive strength of 20 MPa
• Thermal conductivity: 0.32W/mK*  (*built with AC mortar)
• Soundproofing insulation: 54dB**  (**plaster on both sides of the wall – thickness of plaster 2.5–3.0cm)