Back to the list
Go max 10 PU
Go max 10 PU partition element is intended for building partition walls with a thickness of 10cm. It is also extremely useful as an outer layer when building a sandwich wall.
Advantages:
Advantages:
- Lesser consumption of mortar (less thermal bridges). Mortar consumption (theoretical): 10l/m², 91l/m³, GO MAX 10 PU V(500X100X238): 8l/m², 73l/m³,
- Element length of 50cm (consumption only 10 pieces/m2),
- Tongue and groove joint (reinforced wall at the vertical joint, prevented thermal bridge)
- Elegant for the assembly of water plumbing and electrical installations
- Suitable for the installation of console loads
- Excellent compressive strength of 15MPa
- Soundproofing insulation: 47dB ( *plaster on both sides of the wall – thickness of plaster 1.5-2.0cm)
- Thermal conductivity: 0.32W/mK (*built with AC mortar)
| Name | Length (mm) | Width (mm) | Height (mm) | Weight (kg) | Wall thickness (cm) | Compressive strength (MPa) | Consumption (pcs/m³) | Mortar consumption | Pack./ Piece per pallet |
|---|---|---|---|---|---|---|---|---|---|
Name GO MAX 10 PU(500x100x190) | Length (mm) 500 | Width (mm) 100 | Height (mm) 190 | Weight (kg) 8.40 | Wall thickness (cm) 10 | Compressive strength (MPa) 15 | Consumption (pcs/m³) 91 | Poraba malte (l/m²)* 10 (l/m²)91 (l/m³) | Pack./ Piece per pallet 100 |
Name GO MAX 10 PU V(500x100x238) | Length (mm) 500 | Width (mm) 100 | Height (mm) 238 | Weight (kg) 10.10 | Wall thickness (cm) 10 | Compressive strength (MPa) 15 | Consumption (pcs/m³) 73 | Poraba malte (l/m²)* 8 (l/m²)73 (l/m³) | Pack./ Piece per pallet 80 |
