Back to the list
GO MAX 15 PU (500x150x190)
Go max 15 PU partition element is intended for building non-load bearing inner walls with a thickness of 15cm. It is also extremely useful as an outer layer when building a sandwich wall.
Advantages:
Advantages:
- Lesser consumption of mortar (less thermal bridges). Consumption of mortar (theoretical): 15l/m², 94l/m³
- Element length of 50cm (consumption only 10 pieces/m2),
- Tongue and groove joint (reinforced wall at the vertical joint, prevented thermal bridge)
- Elegant for the assembly of water plumbing and electrical installations
- Suitable for the installation of console loads
- Excellent compressive strength of 15MPa
- Soundproofing insulation: 49dB ( *plaster on both sides of the wall – thickness of plaster 2.5–3.0cm)
- Thermal conductivity: 0.32W/mK (*built with AC mortar)
Name | Length (mm) | Width (mm) | Height (mm) | Weight (kg) | Wall thickness (cm) | Compressive strength (MPa) | Consumption (pcs/m³) | Mortar consumption | Pack./ Piece per pallet |
---|---|---|---|---|---|---|---|---|---|
Name GO MAX 15 PU (500x150x190) | Length (mm) 500 | Width (mm) 150 | Height (mm) 190 | Weight (kg) 11.20 | Wall thickness (cm) 15 | Compressive strength (MPa) 15 | Consumption (pcs/m³) 63 | Poraba malte (l/m²)* 15 (l/m²)94 (l/m³) | Pack./ Piece per pallet 80 |